The Saudi directory for PPF & ceramic coating15,000+ Google impressions and visits in the last 30 daysmore than 800 shops in 42 cities800+ shop page views300+ customers contacted shops directly500+ searches in the directory×9 growth in Google impressions on the month before

Ceramic coating on top of PPF: is it worth it, and when should it be applied?

Last reviewed: · 3 min read

Short answer: a coating on top of film does not add stone-chip protection. It makes the film's surface slicker and cleaner, reduces staining from bird droppings, bugs and water spots, and makes washing easier in dusty conditions. It is worth it if the car is parked in the sun and gets dirty often. It goes on once the film has settled, following the film manufacturer's instructions.

What it actually adds

  • Stain resistance: the film's top coat can stain. A coating gives it an extra barrier. See bird droppings and bugs.
  • Easier washing: dust and dirt do not cling hard and rinse off.
  • More gloss on gloss film.
  • A longer-lasting top coat, because there is less friction and dirt.

What it does not add

  • No extra stone-chip resistance. That is the film's job.
  • No better self-healing. Some people find self-healing slightly slower under a coating. This varies between products.
  • No fix for installation faults. Bubbles or lifting edges will not be hidden by a coating.

When you do not need it

  • The car is under a shade most of the time and is washed correctly and regularly.
  • The film is only on the front, and you want ceramic on the rest of the car. There, the coating matters most on the exposed paint. On the film it is an extra.
  • Your budget is limited: the film comes before a coating on top of it.

How long to wait after the film goes on

There is no single number. Film is installed with water, and that moisture needs time to escape. Some manufacturers allow a coating after a few hours. Others ask for days or weeks. Ask the shop for the film manufacturer's instructions, by product name.

Many shops apply the film and then the coating in stages during the same visit, or have the car back a few days later. Both are fine if they follow the product's instructions.

Matte film

  • Do not put a gloss coating on matte film. It can change its look and leave it semi-gloss.
  • There are coatings made for matte surfaces. Ask for one by name.
  • Matte film stains more easily, so a matte-specific coating is even more useful there than on gloss film.

The warranty

  • Some film manufacturers make a coating for their own films and recommend it.
  • Ask: does this coating affect the film warranty? Get the answer in writing.
  • The coating warranty is separate from the film warranty. See the warranty guide.

Maintenance

A coating on film wears just as it does on paint, especially on the front. Use a pH-neutral shampoo and film-safe maintenance products. And if water stops beading, read water not beading before you decide anything.

Bottom line

Film protects against impacts, and the coating protects the film from dirt and stains. If you can afford both, it is a sensible combination for Saudi conditions. If you have to choose, film first. The full comparison is in PPF vs ceramic coating.

See PPF shops and ceramic coating shops in your city.

More guides

Recently added