The Saudi directory for PPF & ceramic coating15,000+ Google impressions and visits in the last 30 daysmore than 800 shops in 42 cities900+ shop page views300+ customers contacted shops directly500+ searches in the directory×10 growth in Google impressions on the month before

Car protection glossary: from TPU to high spots

Last reviewed: · 4 min read

There are a lot of protection terms, and most come from English. Here is what each one means in short, with a link to the guide that explains it in detail.

Film (PPF) terms

PPF: Paint Protection Film. A thick clear layer stuck to the paint that takes stones and scratches instead of it. What is PPF?

TPU: the material good protection films are made from. Flexible, heals light scratches, and resists yellowing better than the alternatives.

TPH and PVC: cheaper materials used in some films. Less flexible, and affected by the sun faster.

Top coat: the top layer of the film. It provides the gloss, the self-healing and the stain resistance.

Self-healing: the top coat's ability to return to its shape with heat, so light scratches disappear. PPF scratches

Mil: the unit of film thickness. Common films are roughly 6 to 10 mil.

Pre-cut: film cut by a machine to the car's pattern before installation.

Bulk (hand cut): film trimmed on the car itself with a blade. Knife marks on the paint

Knifeless tape: a tape with a filament that cuts the film without a blade on the paint.

Wrapped edges: film folded around the panel edge instead of stopping short of it. PPF coverage options

Full front: the whole bonnet, bumper, wings and mirrors. Partial front: part of the bonnet and wings.

Stretch: pulling the film so it follows curves. Too much stretch causes ripples and lifting edges. PPF edges lifting

Slip solution: soap and water sprayed under the film so it can be moved during installation. What is left behind causes water bubbles that disappear. Bubbles under PPF

Yellowing: film changing colour in the sun. PPF yellowing

Orange peel: a light wavy texture visible in reflections. Does PPF change the look?

Ceramic coating terms

Ceramic coating: a liquid layer that hardens on the paint, adds gloss, and stops dirt and water from clinging. What ceramic coating does

Curing: the time the coating needs to harden fully. Usually days, during which you do not wash the car. Aftercare

9H and 10H: hardness figures printed on products. They do not mean the car cannot be scratched.

High spot: a patch or streak of excess coating that was not wiped off. High spots

Beading: the shape water droplets take on the surface. Not the only measure of protection. Water not beading

Ceramic spray / sealant: a light maintenance product, weaker and shorter-lived than a professional coating. Car wash nano vs ceramic coating

Paint preparation terms

Paint correction: machine polishing that removes light scratches from the clear coat. Paint correction before ceramic

Stage: one polishing pass with a particular product and pad.

Clear coat: the top layer of factory paint, over the colour.

Clay bar: a clay that removes bonded contamination washing leaves behind.

Iron remover: a spray that dissolves iron particles from brakes and roads.

Panel wipe: wiping the surface with a solution before coating to remove polish residue.

Paint depth gauge: a device that measures paint thickness in microns and reveals repainted panels. Checking a new car's paint

Swirl marks: fine scratches that circle around a light source, mostly from washing. Black cars and swirl marks

Washing and care terms

pH-neutral shampoo: a shampoo that does not affect film or coating.

Two-bucket method: one bucket for shampoo and one for rinsing the mitt. Washing after a dust storm

Water spots: minerals left behind when water dries. Water spots

Quick detailer: a spray for cleaning light marks between washes. Bird droppings and bugs

Warranty terms

Manufacturer's warranty: covers product defects. Workmanship warranty: from the shop, covering installation faults. The warranty guide

Roll number: the film's batch number, important for warranty registration. Is the film genuine?

Authorized installer: a shop authorized by the manufacturer. Authorized dealers

Bottom line

Knowing the terms helps you understand shop quotes and compare them properly. If you hear a word that is not here, ask the shop to explain it. A good shop explains without getting annoyed.

See PPF shops and ceramic coating shops in your city.

More guides

Recently added