The shop refused your PPF or ceramic warranty claim: what to do
Short answer: first make sure the problem really is covered by the written warranty. Then document everything, and ask for the refusal in writing with the reason. If the warranty comes from the manufacturer, contact its agent directly. If that does not resolve it, you can report it to the Ministry of Commerce through the Balagh Tejari («بلاغ تجاري») app or by calling 1900.
Step 1: is the problem covered?
Read the warranty before you talk to anyone. There are usually two:
- The manufacturer's warranty: covers product defects such as yellowing, cracking and delamination.
- The shop's workmanship warranty: covers edges, bubbles and installation faults.
Some things are usually not covered: stone chips, scratches from use, and damage from accidents or poor washing. More in the warranty guide.
If your problem is within what is written, carry on.
Step 2: gather your papers
- The invoice, with the product name and panels.
- The warranty card or registration message.
- Dated photos of the problem, close up and from further away.
- Photos from pickup day, if you have them.
- Your messages with the shop.
- Proof of maintenance, if the warranty requires periodic maintenance (as some coating warranties do).
Step 3: ask in writing
- Send the shop a clear message (WhatsApp or e-mail): what the problem is, when it appeared, and what you are asking for.
- If they refuse, ask for the refusal in writing, with the reason. A written reason helps with every step after this.
- Keep it calm and specific. Short, clear messages get answers faster.
Step 4: the manufacturer's agent
If the problem is a defect in the product itself (yellowing, cracking, delamination):
- Contact the manufacturer's agent in Saudi Arabia, or the manufacturer directly through its website.
- Send the invoice, warranty number and photos.
- Some manufacturers can refer you to another authorized shop to fix it, especially if the first shop has closed.
Note: many manufacturers only honour the warranty if the film was installed by an authorized shop and the warranty was registered. This is where checking that the film is genuine and registered pays off.
Step 5: report to the Ministry of Commerce
If the shop refused without a reasonable cause, or did not honour what the warranty says:
- The Balagh Tejari app from the Ministry of Commerce: choose the report type, enter the shop's details, describe the problem, and attach the invoice and photos.
- The unified number 1900.
- Write the shop's name as it appears on the invoice, its location, and the date.
Warning: use official channels only. The Ministry of Commerce has warned about fake websites and links claiming to take reports. The ministry never asks for bank details or verification codes.
If the shop has closed
- The manufacturer's warranty may still be valid; contact the agent.
- The workmanship warranty usually goes with the shop, but some agents will refer you to another authorized shop.
How to avoid this from the start
- Choose a shop with a clear track record and genuine reviews. See how to choose a shop.
- Get a detailed written warranty: what it covers, for how long, and on what conditions.
- Register the warranty with the manufacturer yourself if you can.
- Inspect at pickup and again a few weeks later. See the pickup checklist.
Bottom line
Most disputes are settled with clear papers and a calm message. If not, you have the manufacturer's agent and the Ministry of Commerce. Just do not wait, because some warranties require you to report a problem within a set period.
See PPF shops and ceramic coating shops in your city.







