The Saudi directory for PPF & ceramic coating15,000+ Google impressions and visits in the last 30 daysmore than 800 shops in 42 cities800+ shop page views300+ customers contacted shops directly500+ searches in the directory×9 growth in Google impressions on the month before

Replacing one piece of PPF after a chip or scratch: will the difference show?

Last reviewed: · 3 min read

Short answer: yes, you can replace just the damaged piece, such as the bonnet, a bumper or a mirror. If the old film has not changed colour, the difference is barely visible. If the old film is a few years old and slightly yellowed, the new piece can look clearer, especially on light-coloured cars. In that case it is better to replace the neighbouring pieces too.

When to replace a piece

  • A stone hit cut the film in a visible spot.
  • A deep scratch that heat did not fix. See PPF scratches and self-healing.
  • An etched stain from bird droppings or a chemical.
  • An edge that keeps lifting on the same piece.
  • After an accident and repair of the panel.

When to think about more than one piece

  • The film is several years old and has changed colour, even slightly.
  • The car is white or silver, and the difference will show.
  • The damaged piece sits next to large panels such as the bonnet and wings, and the eye compares them directly.

How a piece is replaced

  1. The old film is removed from the panel slowly, with heat. See PPF removal.
  2. Adhesive residue is cleaned off.
  3. The paint underneath is checked, and any cut or mark is treated before the new film.
  4. The new piece is fitted to the same boundaries as before, so the film line does not change.
  5. Drying and inspection.

If the shop has the pattern for that panel of your car on its computer, replacement is easier and faster.

Same product or a different one?

  • The same product is best, so the gloss and texture match.
  • Gloss film next to gloss film of a different type can show a slight difference in depth and shine.
  • Matte film is more sensitive, and two different matte films differ clearly. It must be the same product.

The warranty

  • Stone chips and scratches are usually not covered, because absorbing them is the film's job.
  • A defect in the film, such as cracking or delamination on one piece, is usually covered by the manufacturer.
  • Edges lifting repeatedly in the first months are usually covered by the shop's workmanship warranty.

See the warranty guide. And ask: does the new piece get a new warranty, or does it continue under the old film's warranty?

After an accident

If the panel was repaired and repainted, do not put film on it straight away. New paint needs time to dry and harden before film goes on, and how long depends on the paint and on whoever painted it. Ask them, and ask the protection shop.

What to agree with the shop

  1. The same product?
  2. The same cut lines?
  3. What happens if a clear colour difference shows?
  4. The warranty on the new piece.
  5. Is removal included in the price or separate?

Bottom line

Replacing one piece is a practical fix, and the difference usually does not show. Just be careful with older film and light-coloured cars, and ask for the same product.

See PPF shops in your city.

More guides

Recently added